Shin's Blog

this is command to used:

Router#audio-prompt load ?
  WORD  audio-prompt load name

1) login to CUE:
service-module integrated-Service-Engine 0/0 session

2) Reinstall CUE software:
software install clean url ftp://x.x.x.x/cue-vm.2.3.4.pkg

(y) yes, to continue

3) Select the CUE language to install.
(remember to input cue-vm-de_DE-lang-pack.2.3.4.1.prt1 in the same directory of main cue-vm.2.3.4.pkg)

4) Finish the installation and wait…

Prerequisite is to have FTP service up, either MS ftp or FileZilla or similar for XP/2003 server or to off site ftp, However I recommend upgrading from a local ftp and add all files from SCUE-UC520-3.x.x.zip to FTProot, ensure you have write permissions to the ftp folder.

Backup

1. Telent to 192.168.10.1 (default IP)

2. Enter credentials

3. Enable

4. Enter credentials

5. Type# service-module integrated-service-engine 0/0 session

(ser int 0/0 sess)

(more…)

Standard FAC Description

**1 plus optional extension number Call forward all.

**2 Call forward all cancel.

 **3 Pick up local group.

**4 plus group number Pick up a ringing call in the specified pickup group. Specified pickup group must already configured in Cisco Unified CME.

**5 plus extension number Pick up direct extension.

(more…)

using these command to fix fax issue on fxs ports.

voice service voip
fax protocol pass-through g711ulaw

stop analogy phone registed to SIP provide

dial-peer voice 1 pot
no sip-register

Debug incoming/outgoing calls

debug voice ccapi inout
debug ccsip message

need to delete following if block the incoming calls.

voice source-group CCA_SIP_SOURCE_GROUP
 access-list 2
 translation-profile incoming SIP_Incoming

dial-peer voice 1000
permission term

(more…)

need to delete following if block the incoming calls.

voice source-group CCA_SIP_SOURCE_GROUP
access-list 2
translation-profile incoming SIP_Incoming

dial-peer voice 1000
permission term

(more…)